So I've seen a lot of signs on Pinterest that say "BOO!" And I finally decided it was time to make my own. Everything I used in this project I already owned...whoo hoo! So here's how mine turned out:
Mine got a little bigger than I was originally aiming for. Here's my original pin:
This beautiful sign was for sale in an Etsy Shop called PeaceGlitzNGlam but has since sold.
I began my project with 3 wood pieces...I have a ton of these because I came across them one day in ACMoore and they were only 25CENTS!!!!!
I painted the fronts and sides with black craft paint and a sponge brush. I use sponge brushes whenever I can. They are crazy cheap and great to use and toss especially when working with Mod Podge!
After they dried it was time to cut the burlap. I happen to have a strip cut from a prev project which also happen to be the perfect width. All I had to do was cut the length. Burlap frays so easily...so here's a tip: pull one or two fibers out from the area you want to cut, then cut through that area. See the picture below? I pulled a thread out. then cut along that open space.
I did this for all three wood pieces. Then I covered the wood pieces with Mod Podge and pressed the Burlap on top to secure.
Next, I cut out letters using the Happy Hauntings font on my Cricut Craft Room and some creepy spider paper I had left from a previous Halloween mini album.
I decided then to ink the edges using Tim Holtz distressed ink in Peeled Paint. But after I started inking the edges, I decided to blend and cover the entire letter. I knew that I wanted to use 3D adhesive dots to help the letters stick off the wood pieces, but my paper was really thin. So I decided to laminate them. This also helped me to ensure that my sign could last through the years.
For some reason I decided to take this project even further. I had this picture and frame that I bought at a thrift store months ago for $1 or $2.
I pulled all those staples out.
Then I tried painting the front with craft paint. But I realized it was going to take A LOT of coats to cover it. So I flipped it over and painted the back.
I had this bottle of crackle medium...it's a very OLD bottle...but I gave it a shot...
After covering the frame with the crackle medium and allowed it to dry, I painted the frame black.
It worked...okay...but it's supposed to look grungy so it worked for me! By the end I went along some ridges and edges of the frame with silver craft paint too. While that dried I finished off the "picture" part. I knew I wanted something else for the background...plain purple just wasn't going to work. I thought about drawing some spiders on...but then I looked through my lace and I had a small piece of black that was just a bit longer than what I needed! WHOO HOO! Perfect! I covered the purple area with Mod Podge and pressed the lace on top to secure. Then I cut the excess off the ends.
Once it was all dry, then it was time to put the background back into the frame. I secured it with nails I had in a tool kit and added a picture frame hanging bar thing (technical name, I'm sure) to the back. Next I hot glued the wood pieces into place. The hands came from a bag full that I got from Michael's (and they have them this year too)!
Hope you enjoyed this tutorial! Thanks so much for stopping by!
No comments:
Post a Comment