Lomo Action Sampler

The Lomography website had a sale on some of their merchandise about a week and a half ago. I bought some film and I bought another camera. This is a 35mm camera that has 4 lenses. It’s called an action sampler. They actually make them with 6 and 9 lenses but this one was cheap ($20) so I went with this one. Unfortunately, I have a lot to learn about this camera too. Only about 10 images actually are visible but luckily the camera came with a roll of film so I’m not too upset that it was kind of a waste of 36 exposures. What I learned from this first run with Boing (that’s what I call it because it was labeled the “football” style camera…it says “Boing” on it and the “o” is a soccer ball) is that aim is important, lots of light is important and, of course, movement is important. Some of my images kind of cut off what I was trying to focus on. And my indoor pictures are not distinguishable and if there is no movement, then its just the same 4 images. What I liked about the images were some pretty colors. Some of them were just so blue…one of the reasons I like lomo cameras is the way an image can be saturated with a color with or without a color flash. I’m working with Diana still…I’m trying to find out where I can get 120 film developed without being so costly….I’ll be sure to update on that…for now enjoy some of the images I got with BOING!

Custom Framing

Here’s an easy way to decorate with your very own personal touch…make your own frame! All you need is :
~cardboard
~scissors
~glue stick
~tape
~scrapbook paper
~embellishments
~ruler
~pencil
First I started by finding a piece of cardboard that I could use. It was already just the perfect size so I just went with it. You may need to cut yours to a suitable size. If so, do that. Next, my picture I wanted to frame was a 4X6 picture so I needed the frame opening to be slightly smaller than that so I used my ruler and pencil to mark the size I wanted. Then I cut it out. I then placed that in the center of the cardboard piece that I want to use as my frame and traced it with the pencil.


Next I used my cutter bee scissors to cut an “X” in the center of the box I just made. You may need to use an exacto knife if you don’t have scissors with a sharp tip. This makes 4 triangle with one edge still attached to the frame cardboard.


From there I cut the edges attached off.


Then I used a glue stick and covered one side of the frame with it, and firmly pressed it onto the back of the scrapbook paper I was using and made sure it was thoroughly attached.


Next I used my cutter bee scissors to cut an “X” in the center of the box I just made. Again, you may need to use an exacto knife if you don’t have scissors with a sharp tip. This makes 4 triangle with one edge still attached to the paper.


Next I used the glue stick to apply glue on these triangles and folded them back over the frame making the frame center open.


Next I cut off excess paper


Then I folded the paper from around the outside of the frame towards the back and secured with the glue from the glue stick. I started with opposite sides so then I could make the edges smoother as they could be folded like a present.




Next I attached the back of the picture I am using to the cardboard I used to trace the center of the frame. This provided a solid back for the image. I secured it with tape.


Then I took excess cardboard and made a stand by taping it to the back and folding it to secure it at a position that would support the frame.


Then it’s ready for embellishments! Have fun with it!