Pinspiration Sunday: DIY Door Jammers

Have you seen these door jammers floating around on Pinterest? If you haven't, the idea is this...you can sneak in and out of your little one's room without having to turn the door knob and wake them. They are super cute and a crazy great idea...and once you've bought one, you realize, these would be so easy to make. Like everything else in our baby girl's nursery, I needed a custom made one to match, right?!?! ;) The best part? I already had all my supplies so it didn't cost me a thing...I love FREE! 

So here's how I made mine.

Supplies:

2 hair ties (those really thick ones)

fabric

cushiony (if that's a word) fabric like felt or fleece (I used fleece)

measuring and cutting tools

thread

sewing machine

iron

I had some fabric leftover from my crib bumper makeover so I used that. You want to cut your pieces into rectangles. My section of leftover fabric was 6 inches wide, so I cut my pieces 6" X 4" to get started.

Next, you want to fold your fabric edges over and iron them down. This will give you a nice smooth edge for your finished project. I didn't measure mine, just did one piece all the way around and then matched the second piece by laying it on top to see where my creases need to be made.

Next I cut my corners down so there wasn't so much fabric there.

Then, I cut a piece of fleece slightly smaller than my two fabric rectangles. 

And put it inside the folded over edges of one of the fabric rectangles.

Next, I put the hair ties in place on each end of the rectangle.

After that, I placed the second fabric rectangle on top, lining up the edges and pinning them together.

Now, you're ready to sew. As seen in the other images of door jammers, I sewed along the outside edge then moved in about a quarter inch or so and sewed all the way around again. This is how it turned out.

Here's the door jammer on the door, ready to go.

Hope you liked this tutorial! Thanks for stopping by!

Nursery Reveal

So my hubby was hard at work making over our spare room into a nursery for our baby girl. Here are a few pictures of what the room looked like just as we were beginning the transformation.

After some spackling, sanding, carpet ripping, painting, floor laying, projecting finishing and decorating...it looks like this:

Some DIY projects:

Scrapbook paper over fixture covers

pillowcase

mobile

crib bumper

artwork found on Pinterest

Pinspiration Sunday: DIY Changing Pad Cover

Here's another post on getting the nursery ready. I'm on overdrive as they are thinking of placing me on bed rest and have given me steroids in case I should have a preterm delivery. So it's time to get these projects done. This one came from Pretty Prudent again. I used the left over fabric from my crib sheet tutorial and my adjustable crib skirt tutorial.

Supplies:
Fabric of your choice
sewing machine
thread 
elastic
pins and a safety pin
scissors
measuring tools
iron

*Be sure to wash and dry your fabric before you begin*

My changing pad is the standard  32" long X 16" wide and 3-4" high so these directions are for those measurements. Since I used two fabrics I measured one to be 17.5" X 32" and the other 30.5" X 32". or you can use one fabric and cut it to measure 48" X 32".

Place your fabrics facing one another along the 32" side and sew them together. Jaime suggested then trimming the seam with pinking shears but I don't own those so I did not (like I've said before I'm not a seamstress). Then iron your seam flat.

Next cut 8" X 8" squares out of each corner. 

Now with the two sides facing each other sew along to create your corners.

Now it's time to create the hem to feed your elastic through. Fold your fabric over about a half inch  or so and iron. Then fold over again and pin (this time I didn't iron...I'm lazy). Next sew along to create your hem leaving room so that you can thread your elastic through. Start in one corner, back stitching and leave room when you come back to that corner to thread the elastic and back stitch.

Add caption

Jaime said to use a yard of elastic 5/8" or less. I used a 1/2" elastic and once I finished it was too tight and my changing pad would not lay flat so I took the elastic out and used a 46" piece and this worked great for me. Pin one end to the cover and pin a safety pin to the other end and feed through the hem you've made.

Once all the way through, sew the two ends of the elastic together. 

Now you can finish sewing the gap you left. You should get something that looks like this.

Now it's time to put it on the changing pad...you're done!

Thanks for stopping by!

Pinspiration Sunday: DIY Adjustable Crib Bed Skirt

So here's a project I found on Pinterest from the blog  View Along the Way. I thought this was going to be ridiculously easy...and well it is...if you have proper tools and know what you're doing...that's not exactly me and I have this belly to contend with...

So I worked on my kitchen floor with the tools I had and the space I had to do it in. And it went something like this...

Supplies:

Fabric of your choice. As Kelly suggested I used a home decor 54" fabric and used about 2 yards

Measuring tools

Scissors

Fabric marker

Pins

Sewing Machine

Iron

Thread to match your fabric

**Be sure to wash, dry and iron your fabric first**

You'll need to measure your crib to get the exact dimensions you need for your project. Mine Measured 51.5 inches wide (across the front) X 27.5 inches deep X 17 inches high. Now Kelly suggested you add a one inch seam allowance and an additional 2 inches for the height. Therefore, I cutout 1 piece of fabric which measured 52.5 inches X 20 inches. TO make it easier on me I actually folded the fabric and measured with a yardstick 26.25 inches to get the length I needed. 

Next I worked on the 2 side panels. For this, I folded the fabric in half, ironed the fold and worked from there so I had less measuring and cutting. I measured, marked and cut to get 2 pieces that measured 28.5 inches X 20 inches.

This is the fold for the 2 side panels. Just cut along the fold and your pieces are done!

Now it's time to measure for those seams. Working with only a half inch on each side was torturous for my arthritis, but I did it. If I were to ever make something like this again I would allow more seam allowance. I measured and marked along the fabric 1/2 inch. Then I folded a section so the raw edge lined up with my marks and then I folded it over again and pinned. You can iron your edges, but I just went ahead a sewed it as they were.

Once all your edges are sewn it's time to attach Velcro if you have a spring bottom (if you have a fiberboard bottom you can just pin your skirt to that. For pics on a fiberboard bottom, check out Kelly's from View Along the Way). I took 5 pieces roughtly 4 inches long and sewed them as evenly as I could without actually measuring along the top of one of the longest panel (your front). I used 3 pieces on the side panels.

Now it's time to attach them! 

Once secured you can put your mattress on top. To find out how I made the crib sheet see my post HERE

All done with your awesome, one-of-a-kind crib skirt! Thanks so much for stopping by!